The Nickel Alloy Fasteners offered by us are manufactured using superior grade of metals. These industrial nickel alloy fasteners exhibit sturdy construction, precise dimension and high tolerance level. Our fasteners are manufactured with accurate dimensional for easy installation and removal. We can offer industrial nickel alloy fasteners in variety of specifications as per the requirement of the clients
when the task calls for Nickel 201 fasteners, call for Fasteners And Fixtures.Nickel 201 can be hot formed to almost any shape. The temperature range 1200°F to 2250°F is recommended and should be carefully abided as the proper temperature is the most important factor in achieving hot malleability. Full information of the forming process should be sought and understood before proceeding.
Nickel 201 can be cold formed by all conventional methods, but because nickel alloys have greater stiffness than stainless steels more power is required to perform the operations.Nickel 201 is the low carbon version of Nickel 200. It is preferred to Nickel 200 for applications involving exposure to temperatures above 600°F. With low base hardness and lower work-hardening rate, it is particularly suited for cold forming.
Other applications include chemical shipping drums, electrical and electronic parts, aerospace and
missile components and rocket motor cases.We manufacture Hex Bolts,Heavy Hex Bolts, Grub
Screws,Allen Bolts,Studs,Threaded Bars/Rods, Screws,Set Screws,Nuts,Washer ,Rings & CNC Machined
Components.We can offer these Nickel 201 Fasteners with UNF,UNC,BS,BSF,BSW type threadings.
|
Material
|
Size
|
Length
|
Specification
|
Manufacturer
|
|
Nickel Alloy
|
M02 to M33 |
3 mm |
IS BS ASTM |
GKW Unbrako Kundan APL Sundaram Precision EBY Fastener Etc. |
|
Note:-
|
|
|
Material:
|
Hastelloy,.Cupro Nickel, Nickel, Monel,Inconel, Alloy 20 Etc.
|
|
Standard :
|
ASTM / ASME SB 160 / 164 / 425 / 166 / 446 / 574 / 472 |
|
Nickel Alloy in Grade:
|
UNS 2200 (NICKEL 200) / UNS 2201 (NICKEL 201), UNS 4400 (MONEL 400), UNS 8825 (INCONEL 825), UNS 6600 (INCONEL 600) / UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 8020 (ALLOY 20 / 20 CB 3) |
|
Type of Fasteners:
|
Bolts : Bolts stud bolts, hex head bolts, socket hexagon head screw anchor bolts, u-bolts, J bolts, mushroom head square neck bolts, t- head bolts, wing screw, eye bolt, eye bolt, foundation bolts and structural bolts Washer : Plain washer , plain big & small OD washer , spring lock washer , spring washer heavy duty , tooth washer , star washer , tab washer with one & two tab Nuts : Hexagon nuts, hexagon coupling nuts, hexagon thin nut, square nut, hexagon castle nuts, self locking nut, hexagon domed cap nuts Screw : Pan head slotted screws, cheese head slotted screws, countersunk head slotted screws, countersunk raised head slotted screws, pan phillipse head screw, countersunk Phillipse raised head screws, slotted cheese trim head machine screws, socket head allen cap screws, allen countersunk socket head cap screws, socket head shoulder screws, socket head cap screw low head, hexagon socket set screw with flat point, hexagon socket set screws with cone point, hexagon socket set screw with dog point, hexagon socket set screws with dog point, hexagon socket set screws with cup point, imprial socket cap screws. Other : Threaded rod, as per drawing and customers spec. coating, hot dipped galvanizing, phosphate, Teflon, xylon, zinc, cadmium.
|
|
In Form of:
|
Hex, Square, Round , Threading as per Gauge Etc. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Standard |
Nickel 200 |
Nickel 201 |
|
UNS |
N02200 |
N02201 |
|
Werkstoff Nr. |
2.4066 |
2.4068 |
Chemical Composition
Typical compositional ranges for Nickel 201 Bolts
|
|
Nickel 201 |
|
Ni |
99.0 min |
|
Fe |
0.4 max |
|
C |
0.02 max |
|
Mn |
0.35 max |
|
Si |
0.2 max |
|
Cu |
0.25 max |
|
Mg |
0.15 max |
|
Ti |
0.1 max |
|
S |
0.01 max |
Mechanical Properties
Typical mechanical properties for Nickel 201 Bolts
|
Density |
8.9 g/cm3 |
|
Melting Point |
1446 °C (2635 °F) |
|
Tensile Strength |
Psi – 67000, MPa – 462 |
|
Yield Strength (0.2%Offset) |
Psi – 21500, MPa – 148 |
|
Elongation |
45 % |